Low MOQ for T5 Full Spectrum Led Grow Light - LED 800 Lite-3Z-2835 grow lights fixture – Topline Optoelectronic
Low MOQ for T5 Full Spectrum Led Grow Light - LED 800 Lite-3Z-2835 grow lights fixture – Topline Optoelectronic Detail:
How to choose LED grow lights according to different environments?
According to the size of the planting area, the main decision to use the shape of the LED grow lights, the general LED grow light is square and circular design, for a single plant to fill the light, the use of circular LED grow lights can be more comprehensively illuminated to all parts of the plant, not only can meet the needs of grow light, relatively square LED grow lights planted single plants, but also reduce the waste of electrical energy and light energy. But when planting a large area is the opposite, because of the large area, plant growth interval is tight, requiring each plant to receive uniform light in every place, if you use circular plant lights, the light at the junction of multiple lights can not guarantee a certain error range without uniformity, on the contrary, the use of square LED grow lights can be a good solution to the above problems.
According to the characteristics of the plant, the positive plant needs to provide particularly sufficient light in the stages of flowering/fruiting/rapid growth, and then the LED high-power plant lamp is used to fill the light. If the plant is in the nursery stage and the degree of light needs is not very high, then the use of LED grow light strips can meet the needs of its growth.
The growth environment of plants according to different plant species, the difference is very large, there will be a huge difference in light, air, nutrition, humidity, etc., from the perspective of the use of LED grow lights, mainly consider what kind of light the plant needs, how much is needed, as described earlier. In addition, we should also pay attention to some of these small features, such as: assuming that it is hydroponics, the relative humidity of the environment will be larger, which requires plant lamps to have certain waterproof performance, to avoid affecting the effect of LED grow lights and the life of the lamp itself.
Product detail pictures:
Related Product Guide:
When the T5 lamp is used, it will produce some electromagnetic waves and microwaves. Contains mercury and may have ultraviolet leakage; And many Chinese workers have suffered mercury poisoning from making energy-saving lamps. Light decay, after a long time, the luminosity will be lower than the new product, most of them can not be dimmed, and it is not suitable for dimmable brightness lamps. It is not suitable for occasions where frequent switching is required, and LED or CCFL lighting is better in these occasions. Low color rendering: incandescent and halogen lamps have a color rendering of 100, which is perfect; Most of the color rendering of energy-saving lamps is between 80 and 90, of course, the price is its advantage, and the price ratio of the other two lamps is undoubtedly a huge advantage. Low MOQ for T5 Full Spectrum Led Grow Light - LED 800 Lite-3Z-2835 grow lights fixture – Topline Optoelectronic , The product will supply to all over the world, such as: Malta, Turkmenistan, Munich, Not long ago, Taga City, Miyagi Prefecture, Japan, publicly demonstrated the world's largest LED (light-emitting diode) artificial phototype plant factory to the media. The plant, called Miraihata covers an area of about 2,300 square meters and uses 17,500 LED lights, which can be produced throughout the year and is expected to harvest about 10,000 lettuce trees per day. Not long ago, Fujitsu also announced that after about a year of preparation, low-potassium lettuce produced in its own plant factory began to be put on the market.
By Mag from Malaysia - 2018.02.21 12:14
In our cooperated wholesalers, this company has the best quality and reasonable price, they are our first choice.
By Georgia from Nigeria - 2017.03.08 14:45
